GIS-BASED DIGITAL TERRAIN MODELING FOR MORPHOMETRIC ASSESSMENT OF SEASONAL STREAM BASINS IN MOUNTAINOUS REGIONS

Authors

  • Boboyorov Bekhruz Ikhtiyor ugli Author
  • Umiurdinov Nodirbek Otabek ugli Author

Keywords:

digital terrain model, seasonal stream basin, GIS, elevation data, morphometric assessment, interpolation, mathematical modeling, Achchiksay basin, mountainous regions.

Abstract

Seasonal streams in mountainous and foothill regions can provide an important source of runoff, particularly during snowmelt and periods of rainfall. However, their irregular flow regimes and complex terrain make the assessment of basin characteristics challenging. This study presents a mathematical approach to representing the topographic surface of a seasonal stream basin and deriving a digital terrain model from elevation reference points. The Achchiksay basin, located in the Kyzylcha area of Dehqonabad district, Kashkadarya region, Uzbekistan, was used as the case study. A calculation grid was formed from the available elevation data, and an interpolation-based procedure was applied to describe the spatial variation of the terrain. The mathematical formulation incorporates a series representation and integral transformations to obtain an expression for basin-surface modeling. A numerical experiment using the study site's experimental parameters was then carried out, resulting in a digital terrain model of the basin. The model provides a spatial representation of elevation and can support subsequent morphometric analysis and preliminary assessment of seasonal runoff catchments. The approach may be useful in terrain studies where reliable representation of basin relief is needed to inform water-resource planning. Further validation against independent elevation data and field measurements would help quantify model accuracy.

References

1. Bosurgi G., D'Andrea A. A polynomial parametric curve (PPC-curve) for the design of horizontal geometry of highways. Comput. Aided Civ. Infrastruct. Eng. 2012

27(4):303–312. doi.org

2. Brandli M. A Triangulation-Based Method for Geomorphological Surface Interpolation from Contour Lines // Proceedings $3^{text{rd}}$ European Conference and Exhibition on GIS (EGIS '92), Munich, 1992, Vol.1, pp. 691-700.

3. Briggs I.C. Machine contouring using minimum curvature // Geophysics, 2014, v.39, pp.39-48.

4. Carson M. A. The meandering-braided river threshold: a reappraisal. — J. of hydr. res., Amsterdam, 1984, 73, p. 315–334.

5. Cebecauer T., Hofierka J., Suri M. Processing digital terrain models by regularized spline with tension: tuning interpolation parameters for different input datasets // Proceedings of the Open source GIS - GRASS users conference 2002, Trento, Italy, 11-13 September 2002, pp. 123-134.

6. Cerf R. The quasispecies regime for the simple genetic algorithm with roulette wheel Selection. Cornell University. Adv. Appl. Probability. 2017

49(3):903–926. doi.org

7. Chen R. The multilayer width-integrated velocity measurement method. — Advances in Hydrometry. Proc. Exeter Symp., IAHS Publ., 1982, N 134, p. 75–85.

8. Clarke A.L., Gruen A., Loon J.C. The Application of Contour Data for Generating High Fidelity Grid Digital Elevation Models // Proceedings of Auto-Carto 5, ACSM/ASP Conference, Crystal VA, 1982, pp. 213-222.

9. Cole G., MacInnes S., Miller J. Conversion of Contoured Topography to Digital-Terrain Data // Computers & Geosciences, 1990, 16(1), pp. 101-109.

10. Collins M., Tett S.F.B., Copper C. The internal climate variability of HadCM3, a version of the Hadley Centre coupled model without flux adjustments // Climate Dynamics. – 2001. – № 17. – P. 61–81.

11. Douglas D.H. Collected Algorithms // Paper No.20, Laboratory for Computer Graphics and Spatial Analysis, Graduate School of Design, Harvard University, 1974.

Published

2026-10-11